Nulon Pre-Mixed Coolant is formulated as a budget coolant that is suitable for most vehicles prior to 1988. This ready to use coolant provides mild anti-freeze/anti-boil protection while offering full corrosion protection for the entire radiator and cooling system. Guaranteed to protect for 3 years or 100,000km. This product is safe to use in a variety of vehicles as a top-up to existing green coolant or as a full service coolant for older vehicles requiring TYPE B replacement coolant. For OEM replacement coolant choose Nulon Premium Long Life Coolant, available in both concentrate and pre-mixed (LL or LLTU). 

Benefits

  • Anti-freeze/anti-boil protection protection for 3 years or 100,000km
  • Contains long life inhibitor technology for corrosion protection of cooling system metals
  • Ready to use – just pour directly into the cooling system
  • Suitable for a wide range of vehicles in Australia and New Zealand
  • Protects aluminium, steel, cast iron, solder, copper and brass
  • Safe for all hoses, gaskets and seals

Directions for use

DIRECTIONS AS COMPLETE FILL: Refer to the owner’s manual for cooling system capacity. 

  1. If the system is clean, ensure the engine is switched off, turn the heater on and drain the old coolant (when cool) by removing the drain plug or bottom radiator hose. 
  2. Then flush the cooling system with clean water to remove all traces of old coolant. 
  3. Add Nulon Premixed Coolant. Secure the radiator cap start the engine, bleed air from the system if necessary. 
  4. Check the coolant level is correct when the system is cool. 

AS TOP-UP TO EXISTING COOLANT: 

Add as top-up to existing green coolant,then start the engine and turn the heater on. When the engine is warm, turn it off and allow it to cool. Check the coolant level, and top it up if necessary. 

NOTE: The life of Nulon’s Premixed Coolant when used as a top-up, defaults to that of the original coolant in the cooling system. If you are unaware of the type or life of the coolant in the system we recommend a complete coolant change within the next 5000km or 6 months.

 

Typical Characteristics

PMC  
Density (g/ml @ 15.6oC) 1.005 - 1.015
Freezing point -3
Boiling point * 122
pH 8.0 - 9.0
Reserve alkalinity (ml) 2
Colour Green
Glycol content (g/L) 70

* using 105kPa radiator cap

Due to continued product research and development the information contained in this Product Bulletin is subject to change without notification.

SKU PMC-1
Model # PMC-1
Barcode # 9311090004665
Brand Nulon
Assembled Height 0.090m
Assembled Width 0.325m
Size 1 litre Bottle
Contains Liquid Yes

Nulon

Nulon, a renowned and trusted brand, empowers driving experiences through cutting-edge automotive solutions. Committed to innovation and excellence, Nulon has dominated the automotive industry for years. The extensive range of premium lubricants, additives, and treatments is meticulously engineered to unleash vehicles' true potential.

Passionate about precision and performance, Nulon's products undergo rigorous testing to meet the highest industry standards. From everyday commuters to high-performance enthusiasts, our offerings cater to diverse vehicles, ensuring enhanced efficiency, reliability, and longevity. As the preferred choice for automotive enthusiasts worldwide, Nulon stands as a beacon of quality, performance, and trust in the automotive landscape.

Unleash your vehicle's full potential with Nulon - the driving force behind millions of satisfied customers. Explore our range of products and experience the unmatched performance Nulon delivers.

Select your vehicle using the Part Finder to check fitment for your specific vehicle.
Loading…