Penrite Purple OEM Premix Coolant — 5 Litres

Purple OEM Coolant Premix is a genuine GLYSANTIN® G65® Original Equipment Manufacturer (OEM), fully licensed and warranty-approved, Type "A" ethylene glycol anti-freeze anti-boil coolant, as used in initial manufacturer factory fills. It uses an advanced PSi-OAT (Phosphate and Silicate Organic Acid Technology) based inhibitor system — ideal for modern downsized, high power density, hotter-running engines in the latest generation of passenger cars as well as many other engine types.

• Genuine GLYSANTIN® G65® OEM coolant — fully licensed and warranty approved
• Type "A" ethylene glycol, anti-freeze and anti-boil formulation
• Advanced PSi-OAT inhibitor system — suitable for modern high power density engines
• Pre-mixed at 50% concentration in demineralised water — ready to pour directly into the cooling system, no further dilution required
• 8-year or 500,000 km drain intervals for passenger cars, 4WDs and light commercials (when maintained at 50% concentration)
• 8-year or 600,000 km for heavy duty on-highway diesel; 8-year or 500,000 hours for heavy duty off-highway diesel
• Freezing point: -38°C | Boiling point: 109°C (at 50% concentration)
• Approved for VAG group vehicles (Volkswagen, Audi, Skoda, Bentley, Lamborghini, Bugatti, Porsche, SEAT) to TL 774-L / G12evo specifications
• Suitable for Toyota, Hyundai, Mitsubishi, Kia and other Asian manufacturers requiring P-OAT based coolants
• Suitable for vehicles using Glysantin® G65 initial fill coolants, or where Pink, Purple, Blue or Red OAT-based coolants were previously used
• Can replace P-OAT or PSi-OAT coolants after appropriate flushing
• Suitable for petrol, LPG, light and heavy-duty diesel and industrial engines; passenger cars, 4WDs, motorcycles, light and heavy-duty commercial vehicles, construction and agricultural equipment
• Compatible with Australian, European, Asian and US vehicles
• Prevents rust, corrosion, cavitation and degradation of the cooling system
• Compatible with plastics, rubbers and seals
• Improved tolerance for flux-brazed aluminium heat exchangers
• Protects all internal surfaces from corrosion — cast iron, aluminium, copper and solder alloys
• Protects against pitting of cylinder liners and cavitation
• Free from nitrites, borates and amines
• Does not require supplementary additives
• Extra hard water flexibility
• Formulated to meet strict European EHS regulations
• OEM Approvals: Audi TL 774-L, Bentley TL 774-L, Bugatti TL 774-L, Deutz DQC CB-14, Lamborghini TL 774-L, Porsche TL 774-L, SEAT TL 774-L, Skoda TL 774-L, VW TL 774-L
• Performance Standards: AS/NZS 2108-2004 Type A, ASTM D-4985, BS 6580:2010, SAE J1034, Toyota Long Life TSK2601G, G12evo, and more
• Colour: Purple | Density at 20°C: 1.07 kg/L | Glycol Content: 537 g/L | pH: 7.5–8.5
• Made in Australia

Penrite recommends flushing the cooling system prior to a complete service refill. Can be used as a complete service refill, top-up, and is safe to mix with compatible Type "A" coolants. Confirm the coolant specification required for your vehicle before ordering.