Penrite Enviro+ C3 5W-30 Full Synthetic Engine Oil — 10 Litres

Enviro+ C3 is a premium full synthetic, SAE 5W-30 Original Equipment Manufacturer (OEM), fully licensed and warranty approved engine oil using advanced mid SAPS (Sulphated Ash, Phosphorus and Sulphur) additive technology.

• Manufacturer Approved: Fully licensed and warranty approved for Mercedes-Benz where MB 229.52 is required; also suitable where BMW Longlife-04 (BMW LL-04), MB 229.31, MB 229.51 or GMW 16177 (dexos2™) oils are required
• API Licensed: Licensed by the API (American Petroleum Institute) to meet API SP and API SN Plus specifications
• ACEA Compliant: Exceeds the latest European ACEA C2 and C3 requirements — meets ACEA C2 fuel economy requirements whilst maintaining ACEA C3 wear protection
• Full Synthetic Formula: High-performance base oil combined with advanced additive technology for superior engine protection
• Maximum Wear Protection: Minimises wear, reduces sludge formation and protects against piston deposits
• Enhanced LSPI Protection: Guards against Low Speed Pre-Ignition in modern engines
• Reduced Turbocharger Deposits: Formulated to keep turbochargers cleaner for longer
• Idle Stop Engine Compatible: Provides better wear protection for engines with stop-start (idle stop) systems
• Emission Control Device Protection: Protects DPFs (Diesel Particulate Filters) and catalytic converters; suitable for engines fitted with or without DPFs
• Superior Cold Start Performance: Minimises friction and wear at cold engine start-up
• Improved Fuel Economy: Mid SAPS formulation supports improved fuel efficiency
• Extended Drain Intervals: Designed for long-life, extended engine oil drain intervals
• Application: Designed for modern 4, 6 & 8+ cylinder multi-cam, multi-valve (including VVT), naturally aspirated, supercharged and turbocharged low emission engines — including petrol and diesel hybrids
• Viscosity Compatibility: May be used where SAE 0W-30, SAE 5W-30 or SAE 10W-30 grade oils are recommended in the owner's handbook
• Fuel Compatibility: Compatible with petrol, LPG, E10, diesel, biodiesel, hybrid and most other conventional fuels — not recommended for four-stroke motorcycles with wet clutches
• Suitable Vehicles: Passenger cars, 4WDs and light duty commercial vehicles — including BMW, Chrysler, Dodge, Holden/GM, Hyundai, Jeep, Kia, Mercedes-Benz, Mitsubishi, Nissan, SsangYong, Subaru, Toyota and many others
• Performance Levels Met: ACEA C2, ACEA C3, API SP, API SN Plus, BMW LL-04, BMW Longlife-04, Chrysler MS-11106, Fiat 9.55535-S1, Fiat 9.55535-S3, Ford M2C946-A, GMW 16177 (dexos2™), MB 229.31, MB 229.51, MB 229.52; also suitable where ACEA A5/B5, API SN or ILSAC GF-5 are required
• DPF Maintenance: For vehicles with a Diesel Particulate Filter, Penrite recommends using Penrite Enviro+ DPF Cleaner to clean and prevent DPF blockages and maximise catalyst life
• Oil Change Tip: Penrite recommends using Penrite Engine Flush at each oil change — a fast-acting, solvent-free formulation that removes engine deposits, sludge and contaminants in 10 minutes, with added zinc for wear protection during the flush
• Made in Australia

Confirm the oil specification required by your vehicle or equipment before ordering. Mid SAPS oils may sometimes be referred to as Low Ash oils.