Penrite Enviro+ Hybrid 0W-16 Full Synthetic Engine Oil — 5L

Penrite Enviro+ Hybrid 0W-16 is a premium full synthetic SAE 0W-16 engine oil using advanced mid SAPS (Sulphated Ash, Phosphorus and Sulphur) HYBRID+ additive technology, specifically formulated for petrol/electric hybrid vehicles and low-viscosity petrol engines.

• Full synthetic SAE 0W-16 formulation with mid SAPS additive technology tailored for hybrid applications
• Superior protection against colder engine operating temperatures, frequent stop/starting, water condensation and fuel dilution
• Licensed by the API to meet SQ Resource Conserving, SN Plus Resource Conserving and ILSAC GF-7B specifications
• Meets API SP Resource Conserving specification for improved turbocharger deposit control, oxidation, aeration and fuel economy
• Enhanced Low Speed Pre-Ignition (LSPI) protection
• Improved timing chain and idle stop wear protection
• Suitable for modern 4, 6 & 8+ cylinder, multi-cam, multi-valve (including VVT), naturally aspirated, supercharged and turbocharged petrol engines, including petrol/electric hybrids
• Compatible with vehicles specifying SAE 0W-16 or SAE 0W-20 viscosity grades, including Toyota, Honda, Lexus, Mitsubishi and Nissan models
• Suitable for use with petrol/gasoline including E10
• Not for use in diesel engines, motorcycles, or vehicles not specifically designed for low viscosity engine oils
• Key specs: Density 0.848 kg/L at 15°C | KV at 40°C: 45 cSt | KV at 100°C: 7.3 cSt | Viscosity Index: 165 | Cold Cranking at -35°C: 4695 cP | Sulphated Ash: 0.90 mass%
• Made in Australia

Available in a 5L pack. Penrite recommends using Penrite Engine Flush prior to an oil change to remove deposits, sludge and contaminants before filling with fresh oil.

Please note: the product images may show this item from multiple angles to help with identification. Unless the title states otherwise (e.g. "Pack of 2"), this listing is for a single item only.