Penrite Enviro+ C3 Full Synthetic Engine Oil 5W-30 7L EPLUSC3007
SKU: EPLUSC3007
Penrite Enviro+ C3 Full Synthetic Engine Oil — SAE 5W-30, 7 Litres
Enviro+ C3 is a premium full synthetic, SAE 5W-30 OEM-approved, fully licensed and warranty-approved engine oil using advanced mid SAPS (Sulphated Ash, Phosphorus and Sulphur) additive technology.
- Fully licensed and approved for warranty service for Mercedes-Benz where MB 229.52 is required
- API licensed to meet API SP and API SN Plus specifications; also exceeds ACEA C2/C3 requirements
- Meets ACEA C2 fuel economy requirements whilst maintaining ACEA C3 wear protection (2.6% improvement vs reference oil in M111FE test)
- Suitable where SAE 0W-30, SAE 5W-30 or SAE 10W-30 grade oils are recommended; also covers API SN, API SM, ACEA A5/B5 and ILSAC GF-5 specifications
- Approved to BMW Longlife-04 (BMW LL-04); also suitable where MB 229.31, MB 229.51 or GMW 16177 (dexos2™) oils are required
- Additional OEM performance levels: Chrysler MS-11106, Fiat 9.55535-S1/S3, Ford M2C946-A
- Designed for modern 4, 6 & 8+ cylinder multi-cam, multi-valve (including VVT), naturally aspirated, supercharged and turbocharged low-emission engines, including those with or without DPFs, and petrol & diesel hybrids
- Suitable for passenger cars, 4WDs and light duty commercial vehicles; compatible with petrol, LPG, E10, diesel, biodiesel, hybrid and most other conventional fuels
- Not recommended for four-stroke motorcycles with wet clutches
- Enhanced LSPI (Low Speed Pre-Ignition) protection
- Reduced turbocharger deposits and improved oxidation and deposit control
- Better wear protection for idle-stop (start-stop) engines
- Superior cold engine start-up performance, minimising friction and wear at start-up
- Protects emission control devices including DPFs and catalytic converters
- Extended engine oil drain intervals
- Made in Australia
Important maintenance notes: For vehicles fitted with a Diesel Particulate Filter, Penrite recommend also using Penrite Enviro+ DPF Cleaner to clean and prevent DPF blockages, maximise catalyst life and improve engine efficiency. When changing oil, Penrite recommend using Penrite Engine Flush — a fast-acting, solvent-free formulation with added zinc that removes engine deposits, sludge and contaminants in 10 minutes. A 58mm cap with pouring tap is available separately to fit 7, 10 and 20 litre packs.
Confirm compatibility with your vehicle's oil specification before ordering.
| SKU | EPLUSC3007 |
| Model # | EPLUSC3007 |
| Barcode # | 9316517012940 |
| Brand | Penrite |
| Size | 7L |
| Country Of Origin | Australia |
| Country/Region of Manufacture | Australia |
| Manufacturer Part Number | EPLUSC3007 |
| Country of Manufacture | Australia |
| Contains Liquid | Yes |
| Oil Viscosity | 5W-30 |
Packaging: Manufacturers periodically update their packaging and labelling. You may receive the current or a previous design — the product, formulation and part number are unchanged.
Fitment (vehicle-specific products): For products listed to suit a specific vehicle, our fitment data is kept as accurate as possible, but vehicle catalogues are not perfect. Some models had more than one part fitted depending on build date, engine, or component size/variant. It is the buyer's responsibility to confirm the part suits their vehicle before purchasing. If you have any doubt, please message us with your vehicle's registration number and state (preferred), or full VIN/build details, and we'll do our best to confirm before you buy.
