Penrite Radiator Oil Remover 375mL - Cooling System Flush
SKU: ADROR375
Penrite Radiator Oil Remover 375mL
Radiator Oil Remover is a highly alkaline cooling system flush additive specifically designed to remove oil from an engine's cooling system. It emulsifies oil that has entered the cooling system, allowing it to be flushed clean.
- Suitable for all types of liquid-cooled engines contaminated with engine oil, transmission oil, or hydraulic oil
- Can be poured directly into the radiator, overflow, or expansion bottle
- Safe for use with plastics, hoses, gaskets, seals, header tanks, water pumps, radiators, and engines
- Dissolves oil in the cooling system effectively
- Cleans scale, corrosion, and rust from the cooling system, improving efficiency
- Prevents expensive replacement of cooling system parts that have been contaminated
- Prepares the cooling system for new coolant
- 375mL treats contaminated cooling systems up to 15 litres in capacity
- Note: Radiator Oil Remover should not be left in the cooling system for longer than needed to flush the system
Directions for Use: Drain coolant from the system. Refill with water and add Radiator Oil Remover directly into the cooling system via the radiator or expansion tank. Refit the radiator cap, run the vehicle until the thermostat opens, and leave running for 15 minutes at normal operating temperature to allow the product to emulsify oil. Drain the water and Radiator Oil Remover from the cooling system, then refill with new Penrite Coolant.
| SKU | ADROR375 |
| Model # | ADROR375 |
| Barcode # | 9316517015071 |
| Brand | Penrite |
| Size | 375mL |
| Pack Size | 375mL |
| Manufacturer Part Number | ADROR375 |
| Contains Liquid | Yes |
Packaging: Manufacturers periodically update their packaging and labelling. You may receive the current or a previous design — the product, formulation and part number are unchanged.
Fitment (vehicle-specific products): For products listed to suit a specific vehicle, our fitment data is kept as accurate as possible, but vehicle catalogues are not perfect. Some models had more than one part fitted depending on build date, engine, or component size/variant. It is the buyer's responsibility to confirm the part suits their vehicle before purchasing. If you have any doubt, please message us with your vehicle's registration number and state (preferred), or full VIN/build details, and we'll do our best to confirm before you buy.
