Penrite Transoil SAE 250 — 1 Litre

Penrite Transoil SAE 250 is a premium non-EP, API GL-1 rated gear oil designed specifically for veteran, vintage and Edwardian gearboxes, transaxles, and selected spur and bevel type rear axles.

  • API Rating: GL-1 | SAE Grade: 250 | Volume: 1 Litre
  • Free from aggressive load-carrying additives that may cause corrosion damage to ferrous and non-ferrous metals
  • Compatible with leather and synthetic rubber seals
  • Suitable for use in manual transmissions and transaxles in veteran, vintage and Edwardian vehicles
  • Suitable for use in rear axles of veteran cars of one, two and four cylinders
  • Contains a special additive to assist load-carrying ability of the oil
  • Can be used in older-style hypoid gear sets
  • Colour: Amber | Density at 15°C: 0.901 kg/L
  • Kinematic Viscosity at 40°C: 1203 cSt | at 100°C: 66 cSt | Viscosity Index: 114
  • Contact with water or moisture should be avoided as seal degradation may occur
  • While this oil shares characteristics with the old 600W or steam cylinder oils, it must not be used as a steam cylinder oil
  • Made in Australia

Ensure compatibility with your specific gearbox or axle before purchase.

Specifications

Product Performance LevelsAPI GL-1
ColourAmber
SAE Grade250
Density at 15°C, kg/L0.901
Viscosity, Kinematic, cSt at 40°C1203
Viscosity, Kinematic, cSt at 100°C66
Viscosity Index114
SKU T250001
Model # T250001
Barcode # 9316517016351
Brand Penrite
Size 1L
Country Of Origin Australia
Country/Region of Manufacture Australia
Country of Manufacture Australia
Contains Liquid Yes
Select your vehicle using the Part Finder to check fitment for your specific vehicle.
Loading…

Fitment is based on manufacturer and supplier catalogue data, and we work hard to keep it accurate. Some vehicles were built with more than one version of the same part, and parts can change mid-model (build date, engine or options). We note these differences where we can. Please compare with your existing part before ordering.

Packaging: Manufacturers periodically update their packaging and labelling. You may receive the current or a previous design — the product, formulation and part number are unchanged.

Fitment (vehicle-specific products): Vehicle fitment is based on manufacturer and supplier catalogue data and is kept as accurate as possible, but vehicle catalogues are not perfect. Some models had more than one part fitted depending on build date, engine, or component size/variant, and parts on older vehicles may have been replaced with non-original or different-style components.

Before you buy, compare the product images with the part currently fitted to your vehicle — check shape, size, connectors and mounting points. If the part on your vehicle looks different, please contact us before purchasing. It is the buyer's responsibility to confirm the part suits their vehicle before purchasing.

Not sure? Message us with your vehicle's registration number and state (preferred), or full VIN/build details, and we'll do our best to confirm fitment before you buy.

Parts returned because they do not suit the vehicle, where the listing matches the manufacturer's catalogue, are treated as a change of mind and must be unused, uninstalled and in original packaging. Nothing in this notice affects your rights under the Australian Consumer Law.

More From This Category