Penrite Limslip Additive for Limited Slip Differentials — 150ml

Limslip Additive is a supplement additive designed specifically for use in limited slip differentials to overcome problems with squeal, squawk or chatter.

  • Designed for use with hypoid gear oils to change the frictional properties of the oil, giving them the ability to be used in limited slip differentials
  • Also used as a supplement to formulated limited slip differential gear oils to overcome the problem of adsorption of the additive into friction materials, especially in plate type differentials
  • Effective in changing oil friction properties to allow correct operation of cone type differentials
  • Compatible with hypoid and limited slip gear oils
  • Can be used in mineral or synthetic oils
  • Improves differential performance
  • Reduces squeal, squawk or chatter
  • Recommended for use in BTR/Dana differentials fitted to V8 Holden and Ford cars, Holden/Isuzu light commercials and Jeep
  • Note: If using Penrite's synthetic Pro Gear GL5 75W-85, Pro Gear 75W-90 or Pro Gear 80W-140 oils, no further addition of Limslip Additive is required — these oils are pre-dosed with the correct amount, and further addition may result in seal degradation
  • Treatment Rate: 150ml will treat an axle with up to 2L capacity
  • Industry & Manufacturer Performance Levels: Chrysler MS-5630, Dana 40819, Ford M2C118-A, Ford Motorsport 7098, GM Part Number 1052358

Confirm compatibility with your specific differential before ordering.

Specifications

Product Performance LevelsChrysler MS-5630
Product Performance LevelsDana 40819
Product Performance LevelsFord M2C118-A
Product Performance LevelsFord Motorsport 7098
Product Performance LevelsGM Part Number 1052358
ColourPurple
Density at 15°C, kg/L0.891
Viscosity, Kinematic, cSt at 40°C45
Viscosity, Kinematic, cSt at 100°C7.1
Viscosity Index117
Phosphorus, Mass %0.960
SKU LSADD000150
Model # LSADD000150
Barcode # 9316517017662
Brand Penrite
Size 150mL
Manufacturer Part Number LSADD000150
Contains Liquid Yes
Select your vehicle using the Part Finder to check fitment for your specific vehicle.
Loading…

Fitment is based on manufacturer and supplier catalogue data, and we work hard to keep it accurate. Some vehicles were built with more than one version of the same part, and parts can change mid-model (build date, engine or options). We note these differences where we can. Please compare with your existing part before ordering.

Packaging: Manufacturers periodically update their packaging and labelling. You may receive the current or a previous design — the product, formulation and part number are unchanged.

Fitment (vehicle-specific products): Vehicle fitment is based on manufacturer and supplier catalogue data and is kept as accurate as possible, but vehicle catalogues are not perfect. Some models had more than one part fitted depending on build date, engine, or component size/variant, and parts on older vehicles may have been replaced with non-original or different-style components.

Before you buy, compare the product images with the part currently fitted to your vehicle — check shape, size, connectors and mounting points. If the part on your vehicle looks different, please contact us before purchasing. It is the buyer's responsibility to confirm the part suits their vehicle before purchasing.

Not sure? Message us with your vehicle's registration number and state (preferred), or full VIN/build details, and we'll do our best to confirm fitment before you buy.

Parts returned because they do not suit the vehicle, where the listing matches the manufacturer's catalogue, are treated as a change of mind and must be unused, uninstalled and in original packaging. Nothing in this notice affects your rights under the Australian Consumer Law.

More From This Category