Projecta 12V 1500A Intelli-Start Lithium Jump Starter IS1500
SKU: IS1500
Projecta Intelli-Start IS1500 — 12V 1500A Lithium Jump Starter
The Projecta IS1500 is a powerful and compact professional-grade lithium jump starter delivering 1500A peak current and 700A clamp output, powered by Lithium Iron Phosphate (LiFePO4) battery technology.
- 1500A theoretical short circuit current; 700A clamp output
- Capable of starting engines up to 8.0L petrol and 6.0L diesel
- Rapid Recharge Technology® (RRT): leave the jump starter connected to the vehicle for 40 seconds after starting and it recharges to 100% of original charge status (requires a fully functioning alternator)
- 24,000mAh / 76.8Whr Lithium Iron Phosphate (LiFePO4) battery with up to 2,000 charge cycles
- Up to 110 (petrol) or 21 (diesel) jump starts from a fully charged unit without a vehicle battery; 220 (petrol) or 110 (diesel) emergency jump starts with a flat vehicle battery — unlimited with 40-second RRT
- More than 75% lighter than an equivalent lead-acid jump starter, allowing engine-top operation during use
- Spark-free clamps with automatic solenoid polarity protection; comprehensive protection against reverse polarity, short circuits, overheating and voltage spikes
- LED charge level indicators and battery status button for easy monitoring
- Includes a docking station for storage charging, which cell-balances the battery for 10–20% longer battery life
- 55cm jump leads with 20mm² cable
- Recharges via 15V/1A AC adaptor through the docking station
- Dimensions: H 196mm × L 235mm × W 180mm; Weight: 4kg
- USB power bank output and built-in LED light for roadside emergencies
- Suited to professional workshops, car dealerships, panel shops and roadside service use
The IS1500 is supplied with a 12V 1500A jump starter, AC charging adaptor (15V/1A), charging docking station, and instruction manual. Check the specifications against your requirements before ordering.
Specifications
| PART NO | IS1500 |
|---|---|
| APPLICATION | Professional/Trade |
| OUTPUT | 12V |
| JUMPSTARTS (Without a vehicle battery) | 110 (Petrol) 21 (Diesel), UNLIMITED with 40 sec RRT |
| EMERGENCY JUMPSTARTS (With a flat vehicle battery) | 220 (Petrol) 110 (Diesel), UNLIMITED with 40 sec RRT |
| RAPID RECHARGE TECHNOLOGY® | Yes |
| SUITABLE FOR VEHICLES | Up to 6.0L diesel or 8.0L petrol |
| BATTERY CAPACITY | 24,000mAh, 76.8Whr |
| BATTERY CHEMISTRY | Lithium Iron Phosphate (LiFePO4) |
| THEORETICAL SHORT CIRUIT CURRENT | 1500A |
| CLAMP OUTPUT | 700A |
| TOTAL BATTERY CYCLES | 2000 |
| LENGTH | 55cm |
| CABLE | 20mm² |
| POLARITY PROTECTION | Automatic solenoid control |
| VIA | Charger Docking Station/RRT |
| SOURCE | 15V/1A AC Adaptor |
| MAIN CHARGE | Internally Cell Balanced Constant Current/Constant Voltage |
| MAINTENANCE CHARGE | Constant Voltage at 14.6V |
| WEIGHT | 4kg |
| DIMENSIONS | H: 196mm L: 235mm W: 180mm |
| SKU | IS1500 |
| Model # | IS1500 |
| Barcode # | 9315219151513 |
| Brand | Projecta |
| Manufacturer Part Number | IS1500 |
| Contains Liquid | No |
Fitment is based on manufacturer and supplier catalogue data, and we work hard to keep it accurate. Some vehicles were built with more than one version of the same part, and parts can change mid-model (build date, engine or options). We note these differences where we can. Please compare with your existing part before ordering.
Packaging: Manufacturers periodically update their packaging and labelling. You may receive the current or a previous design — the product, formulation and part number are unchanged.
Fitment (vehicle-specific products): Vehicle fitment is based on manufacturer and supplier catalogue data and is kept as accurate as possible, but vehicle catalogues are not perfect. Some models had more than one part fitted depending on build date, engine, or component size/variant, and parts on older vehicles may have been replaced with non-original or different-style components.
Before you buy, compare the product images with the part currently fitted to your vehicle — check shape, size, connectors and mounting points. If the part on your vehicle looks different, please contact us before purchasing. It is the buyer's responsibility to confirm the part suits their vehicle before purchasing.
Not sure? Message us with your vehicle's registration number and state (preferred), or full VIN/build details, and we'll do our best to confirm fitment before you buy.
Parts returned because they do not suit the vehicle, where the listing matches the manufacturer's catalogue, are treated as a change of mind and must be unused, uninstalled and in original packaging. Nothing in this notice affects your rights under the Australian Consumer Law.
