Penrite Super Dot 4 Brake Fluid (Pack of 3) 500mL

Penrite Super Dot 4 Brake Fluid is a premium quality, non-silicone, non-mineral/petroleum based, fully synthetic brake fluid designed for use in a wide range of brake and clutch applications.

• Recommended for refill or top-up of brake and clutch systems in passenger cars, 4WDs, motorcycles, light and heavy-duty commercial vehicles, mining, construction, and agricultural equipment.
• Suitable for use where the vehicle manufacturer specifies DOT 3 or DOT 4 brake fluid.
• Should be changed according to the manufacturer's service specifications.
• Can be used for first fill or refilling a brake or clutch system. For best results, the system should always be flushed with Penrite Brake Fluid Super Dot 4 prior to first fill or before refilling the system.

Please Note

• Do not mix this product with silicone DOT 5 or mineral type brake fluids.
• For vehicles that require mineral-based products, Penrite LHM Plus should be used.
• Not mixable with silicone type assembly compounds.
• Avoid contact with skin, varnish, and paint. If skin contact occurs, wash with water.

Caution

Brake fluids are naturally hygroscopic and will absorb water from the air. This will lower the effectiveness of the product. After opening the bottle, ensure the cap is resealed tightly to avoid water contamination.

Product Benefits

• Excellent braking response due to the high boiling point of the fluid.
• High wet boiling point ensures long-term retention of fluid performance.
• Better performance for the life of the fluid compared to DOT 3 fluids.
• Compatible with all common brake system materials.
• Compatible with DOT 3 & DOT 5.1 (low temperature, non-silicone type).

Industry & Manufacturer's Performance Levels

• AS 1960.1-1995
• DOT 3
• DOT 4
• Ford ESZ-M6C55-A
• Holden HN 1796
• ISO 4925
• JIS K2233 (Japan)
• SAE J1703
• SAE J1704
• SUPER DOT 4
• US FMVSS No 116 Super DOT 4