Buy High-Quality Air Mass Meters & Sensors at PAT Emission - Perfect Fit for Your Vehicle | PAT Aust
SKU: AFM-136
PAT Air Mass Meter: Your Key to Optimal Engine Management
Ensuring the smooth operation of your vehicle's engine management system, the PAT Air Mass Meter is a crucial component. Positioned between the air filter and throttle body, this Mass Air Flow Sensor measures incoming air and often incorporates the Intake Air Temperature Sensor (ATS). The data it gathers assists your engine's ECU in achieving the correct fuel mix, ignition timing, and sometimes even transmission shifting.
- Features a tiny, electrically heated wire inside the sensor, with another sensor monitoring the wire's temperature.
- Adjusts electrical needs based on airflow over the wire, providing your ECU with accurate airflow volume data.
- Can cause issues such as rough idle, sluggish performance, black exhaust smoke, and poor fuel economy if faulty.
- Common issues include contamination of the hot wire by dust, dirt, or oil gunk, affecting accurate airflow readings.
- Can be diagnosed using the right scan tool or oscilloscope, or by checking for warning codes on your dash.
With PAT Emission, you have access to over 340 top-quality Air Flow Meters and sensors, suitable for a wide range of vehicles across Australia and New Zealand. Choosing PAT means choosing parts that are built to your car manufacturer's standards, ensuring the perfect fit and function.
Note: For correct fitment, ensure the vehicle is listed in the compatibility list and read any notes associated with the product. If there are no vehicle details listed, please send a message.
| SKU | AFM-136 |
| Model # | AFM-136 |
| Barcode # | 9341554001404 |
| Brand | PAT |
| Assembled Length | 0.010m |
| Assembled Height | 0.010m |
| Warranty | 12 Months |
| Contains Liquid | No |
Note: This item may not come in the manufacturers original packaging
Unfortunately, over the past few years, the Australian aftermarket has seen a significant increase in lower quality EFI and Engine Management products. It is easy for consumers and even technicians to be confused as to the quality of the products in the market. Because the issues experienced by workshops installing low quality parts can include safety, expensive repairs and damage to your reputation an increased request for quality products has become evident in the aftermarket.
Sometimes products shipped from leading manufacturers overseas require repackaging in Australia. In these cases we have begun to use a new range of premium packaging to enable easy identification of the premium brand or genuine product. Where required products from leading manufacturers including Pierburg, Bosch, Delphi, VDO, Denso, Valeo, Hitachi, VDO, TI Automotive, Walbro, Bougicord, FAE, Standard Motor Products, TE Automotive, Hella, Bremi and others may be supplied in the new PAT Premium Range packaging, giving you peace of mind that a quality brand product is enclosed.
Some PAT branded products may also be in their original packaging. Due to the changing nature of the supply chains around the world, our supplier sometimes will change suppliers. For example a product that used to be supplied as a Hitachi product might now be a Bosch brand. In all cases they will be well known OE type products as per the above paragraph.
Packaging: Manufacturers periodically update their packaging and labelling. You may receive the current or a previous design — the product, formulation and part number are unchanged.
Fitment (vehicle-specific products): For products listed to suit a specific vehicle, our fitment data is kept as accurate as possible, but vehicle catalogues are not perfect. Some models had more than one part fitted depending on build date, engine, or component size/variant. It is the buyer's responsibility to confirm the part suits their vehicle before purchasing. If you have any doubt, please message us with your vehicle's registration number and state (preferred), or full VIN/build details, and we'll do our best to confirm before you buy.
