Rustoleum Epoxyshield Concrete & Garage Floor Primer 3.78L

Note: To be used on previously coated or worn concrete floors. Do not use on new bare concrete.

If your sealed or previously coated floor is wearing down, or if you just want to update the look of your current floors, Recoat Primer is the perfect solution. This revolutionary 1-part formula allows you to coat over previously coated or sealed concrete without having to scuff, sand, or grind the surface. Transform your worn garage or basement floor with any floor coating (including water and solvent base). Simply Clean, Prime, & Coat!

  • Use over sealed or previously coated surfaces — no sanding or grinding required
  • 1-part water-based formula with low odour
  • Prime and topcoat in one day
  • Covers up to 37sqm per tin
  • No Peel Promise
  • Suitable for interior and exterior use

For Best Results

  • Allow to dry a minimum of 6 hours, but no more than 48 hours, before applying topcoat to ensure proper adhesion
  • One coat recommended

Suitable for use as a base for any floor coating system including Rustoleum Epoxyshield garage floor coatings.

SKU RO374278
Model # 374278
Barcode # 20066203801
Brand Rustoleum
Size 3.78L
Country Of Origin USA
Country/Region of Manufacture USA
Manufacturer Part Number RO374278
Select your vehicle using the Part Finder to check fitment for your specific vehicle.
Loading…

Fitment is based on manufacturer and supplier catalogue data, and we work hard to keep it accurate. Some vehicles were built with more than one version of the same part, and parts can change mid-model (build date, engine or options). We note these differences where we can. Please compare with your existing part before ordering.

Packaging: Manufacturers periodically update their packaging and labelling. You may receive the current or a previous design — the product, formulation and part number are unchanged.

Fitment (vehicle-specific products): Vehicle fitment is based on manufacturer and supplier catalogue data and is kept as accurate as possible, but vehicle catalogues are not perfect. Some models had more than one part fitted depending on build date, engine, or component size/variant, and parts on older vehicles may have been replaced with non-original or different-style components.

Before you buy, compare the product images with the part currently fitted to your vehicle — check shape, size, connectors and mounting points. If the part on your vehicle looks different, please contact us before purchasing. It is the buyer's responsibility to confirm the part suits their vehicle before purchasing.

Not sure? Message us with your vehicle's registration number and state (preferred), or full VIN/build details, and we'll do our best to confirm fitment before you buy.

Parts returned because they do not suit the vehicle, where the listing matches the manufacturer's catalogue, are treated as a change of mind and must be unused, uninstalled and in original packaging. Nothing in this notice affects your rights under the Australian Consumer Law.

More From This Category