RDA Rear Dimpled & Slotted Brake Disc Rotors — RDA7935D (Pair)

The RDA7935D is a pair of rear dimpled and slotted brake disc rotors. The dimples and slots are machined into the rotor face to help clear dust and gas from between the pad and the disc, and to give the pad a clean biting surface under repeated braking.

  • Supplied as a pair — includes one RH and one LH directional rotor
  • 328mm outer diameter
  • Heat tempered for dimensional stability in service
  • GEN3 anti-rust coating
  • Ground finish, so the rotor performs from the outset
  • Dimples and slots increase dissipation of water, dust and road grime from the pad-to-rotor contact area
  • Directional slotting combats "out-gassing" — gas from the brake pad bonding agent can form a cushion between the pad and rotor, reducing pad bite; the slots vent this away
  • Deglazes the contact area to maintain pad and rotor surface integrity

Safety note: Brake rotors and pads are critical safety components. All installation work should be carried out by a qualified and experienced mechanic or technician.

Running-in note: Dimpled and slotted rotors may produce some initial noise for approximately the first 200 km while the pad and rotor materials bed in correctly. This is normal and should subside once the surfaces have mated.

Check the part number and the position on the vehicle against your application before ordering. Rotors should always be replaced as a pair across an axle.

SKU RDA7935D
Barcode # 9333969085261
Brand RDA
Assembled Length 0.010m
Assembled Height 0.010m
Placement On Vehicle Rear
Outside Diameter 328mm
Original Height 58.5mm
Original Thickness 26mm
Minimum Thickness 24mm
Centre Hole 70.5mm
Number of Studs 5
Vented Or Solid Vented
Interchange Part Number RDA7935
Industry Standard Number RDA7935
Position On Vehicle Rear
Industry Standard Part Code RDA7935
Contains Liquid No
Select your vehicle using the Part Finder to check fitment for your specific vehicle.
Loading…

Packaging: Manufacturers periodically update their packaging and labelling. You may receive the current or a previous design — the product, formulation and part number are unchanged.

Fitment (vehicle-specific products): For products listed to suit a specific vehicle, our fitment data is kept as accurate as possible, but vehicle catalogues are not perfect. Some models had more than one part fitted depending on build date, engine, or component size/variant. It is the buyer's responsibility to confirm the part suits their vehicle before purchasing. If you have any doubt, please message us with your vehicle's registration number and state (preferred), or full VIN/build details, and we'll do our best to confirm before you buy.

More From This Category