$23.01
RRP $32.95
SAVE $9.94 (30%)
Available for Online Purchases
ONLINE PRICE ONLY
* This price is only valid for online orders. (Not In-Store)


Click and Collect

Click & Collect will be from Mount Druitt NSW only. Monday-Friday 9am-4pm

*ALL orders must be pre-purchased for Click & Collect

*Orders placed after 11am may not be processed until the next business day

*Address provided in text message when the order is ready.

9 available for Click & Collect within approx 1 business day

Delivery

Delivery Available

9 usually dispatched within approx 1 business day


Product Description

Versatile, easy-to-use, multi-metal epoxy adhesive is two-part adhesive and filler system that eliminates the need for welding or brazing. Sets in four minutes, no clamping needed. Dark grey appearance. Fills gaps and will not shrink. When cured, can be drilled, sanded, threaded or filed. Resistant to water and solvents. Temperature range -60°F to 300°F (-51°C to 149°C). Permanent strength up to 4500 PSI.

Automobile

Suggested Applications: Ideal for complex, multi-piece assemblies. Bonds rigid materials including aluminum, brass, chrome, copper, iron, stainless steel, steel. Use to seal welded seams, fills metal cracks, and mount metal components.

DIRECTIONS:

  1. PROTECT: Work area must be protected from accidental spills.
  2. CLEAN: Surfaces must be clean, dry and free of grease and oil.
  3. PREPARE: Roughen smooth surfaces (using abrasivesor sandpaper).
  4. OPEN PACKAGE: Remove Syringe. Turn syringe nozzle end up and pull plunger backslightly (1/8”). Allow air bubbles to rise to top. Snap off and save storage cap. Push plunger to dispense equal amounts of hardener and resin onto discard-able surface such as a piece of cardboard. Mixing paddle will pop out from plunger. Pull back plunger to stop flow. Snap cap back on.
  5. MIX THOROUGHLY: Thoroughly mix with paddle provided for two minutes until evenly colored.
  6. APPLICATION: Apply small amount of mixture to both surfaces and assemble parts immediately(product sets in approximately 4 – 6 minutes). Remove any excess epoxy immediately.
  7. CURE TIME: Usable strength is reached in 4 hours at 72ºF (22ºC). Cooler temperatures may require longer set time.
  8. CLEAN-UP: Attach nozzle cap and store in molded tray.

WARNING: Adhesive will not bond mostpolyethylene or polypropylene plastics

Item Specifications

Universal FitmentYes

More from this Category

rainstorm