Exelite Mini Beast — 2000 Lumen Rechargeable Handheld Worklight with RGB

A compact worklight that puts a genuine 2000 lumens in your hand on turbo, with a separate COB flood for close work and a magnetic base so you can put it down and keep both hands on the job.

  • Two independent light sources: an SMD spot and a COB flood, each on its own button, so you pick the beam the job needs.
  • 2000 lumen turbo mode: double-tap the SMD button for maximum output — turbo is a 30 second burst for when you need to throw light down a long engine bay or across a yard, then drop back to high.
  • Multicolour RGB lights: double-tap the COB button for RGB modes, with up to 12 hours of operating time.
  • Magnetic base: sticks to any steel panel and leaves both hands free.
  • Integrated clip: clips to a pocket, a belt or an open bonnet edge.
  • USB-C rechargeable: 3.7V 2000mAh battery, 3.5 hour charge time, USB-C cable included.
  • IK07 shock resistant and IPX6 water resistant: built for a workshop floor and for working in the wet.
  • 2 year warranty.

Output and run time:

  • SMD low: 500lm, 4 hours
  • SMD high: 1500lm, 1.5 hours
  • SMD turbo: 2000lm, 30 seconds
  • COB low: 400lm, 5 hours
  • COB high: 1200lm, 1.5 hours
  • RGB: 12 hours

Specifications: Light source: SMD + COB + RGB | Battery: 3.7V 2000mAh | Charging time: 3.5 hours | Charging port: USB-C | Shock resistant: IK07 | Water resistant: IPX6 | Dimensions: 116 x 45.5 x 22.5mm

Includes Mini Beast worklight and USB-C cable.

SKU MINI-BEAST
Barcode # 9360447014376
Brand Exelite
Colour Grey
Warranty 2 Year
Manufacturer Warranty 2 Year
Manufacturer Part Number MINI-BEAST
Turbo mode (2000lm) runs for 30 seconds
Continuous output is 1500lm on SMD high
Select your vehicle using the Part Finder to check fitment for your specific vehicle.
Loading…

Packaging: Manufacturers periodically update their packaging and labelling. You may receive the current or a previous design — the product, formulation and part number are unchanged.

Fitment (vehicle-specific products): For products listed to suit a specific vehicle, our fitment data is kept as accurate as possible, but vehicle catalogues are not perfect. Some models had more than one part fitted depending on build date, engine, or component size/variant. It is the buyer's responsibility to confirm the part suits their vehicle before purchasing. If you have any doubt, please message us with your vehicle's registration number and state (preferred), or full VIN/build details, and we'll do our best to confirm before you buy.

More From This Category