Goss Fuel & Emission Hose — 10mm ID (3/8"), 5 Metre

Goss fuel and emission hose, 10.0mm internal diameter (3/8"), sold in a 5.0 metre length.

  • NBR tube with an SBR/NBR/CR cover — made to SAE J30 R6
  • Suitable for leaded, unleaded and oxygenated (ethanol-enhanced) petrol, oxidised (sour or stale) petrol, diesel fuels, automotive lubricating oils and kerosene
  • Cover resistant to heat, oil, grease, abrasion, weathering and ozone
  • Operating temperature range -34°C to 125°C, with intermittent use to 135°C
  • Maximum working pressure: 241 kPa

Important: This hose is NOT compatible with brake fluid, water or coolant. Do not use as a coolant or heater hose.

Measure the internal diameter you need before ordering.

SKU FH100L50
Model # FH100L50
Barcode # 9315862602202
Brand Goss
Inside Diameter 10mm / 3/8"
Length 5 Metres
Manufacturer Part Number FH100L50
Contains Liquid No
Select your vehicle using the Part Finder to check fitment for your specific vehicle.
Loading…

Packaging: Manufacturers periodically update their packaging and labelling. You may receive the current or a previous design — the product, formulation and part number are unchanged.

Fitment (vehicle-specific products): For products listed to suit a specific vehicle, our fitment data is kept as accurate as possible, but vehicle catalogues are not perfect. Some models had more than one part fitted depending on build date, engine, or component size/variant. It is the buyer's responsibility to confirm the part suits their vehicle before purchasing. If you have any doubt, please message us with your vehicle's registration number and state (preferred), or full VIN/build details, and we'll do our best to confirm before you buy.

Related products

More From This Category