Ezilift Tailgate Gas Strut EZ3171

Note: This is 1 side only. 1 x Strut (these are sold as individual units).
Check the position on the vehicle and the part number against your application before ordering.

This Ezilift gas strut is a replacement lift support for the tailgate. A gas strut holds a tailgate up and lets it down under control. Struts fail gradually rather than suddenly: the panel starts to sag, then needs a hand to hold it, and eventually will not stay up at all. A strut that no longer holds is a heavy panel waiting to drop.

  • Gas-charged lift support designed for OE fit, form and function
  • Heavy-gauge steel body with a baked paint finish to protect its appearance
  • Hardened, polished rod to help prolong the life of the top seal and the strut itself
  • Gas charge of over 330 Newtons, so the strut cannot be compressed by hand
  • Each strut is monitored during assembly to verify correct pressure, then tested in four positions during compression and extension to measure speed and force
  • Two overload tests per strut to assure structural integrity and safety
  • No special tools required for fitting
  • Sold as a single unit. Where a panel uses two struts, replace both together for top performance and to prevent twisting caused by uneven loading
  • Three year warranty from the date of retail purchase, when fitted for the correct application as per the Ezilift gas strut catalogue

All applications are catalogued, but before removing the worn units check that the extended length and end fittings are the same. Check the hinges and connection points for wear, stress fractures or damage, and repair or replace them before installing the new strut.

Installation Instructions

  1. Turn off the ignition. If the old gas strut has a window demister electrical connection, carefully disconnect the fittings.
  2. Replacement is best done with 2 people. One gas strut will not support the weight on its own.
  3. Before removing the old gas strut, examine any fittings supplied to determine which components must be re-used.
  4. Have someone hold the tailgate open while replacing the gas strut. WARNING – DO NOT USE A PROP STICK
  5. Fit the new gas strut in the same position as the old one that was removed. Do not scratch the rod.
  6. Do not remove both gas struts at the same time. Replace one, then close and open the tailgate before removing and replacing the second.

Use the Part Finder or the vehicle compatibility list to confirm suitability before ordering.

SKU EZ3171
Model # EZ3171
Barcode # 9349778013173
Brand Ezilift
Placement On Vehicle Tailgate
Reference OE/OEM Number 91996402
Manufacturer Part Number EZ3171
Position On Vehicle Tailgate
Contains Liquid No
Select your vehicle using the Part Finder to check fitment for your specific vehicle.
Loading…

Fits: Toyota Corolla E18 1.8L Petrol (2012-2018); Toyota Corolla E18,ZRE1 1.8L Petrol (2014-2018).

Fitment is based on manufacturer and supplier catalogue data, and we work hard to keep it accurate. Some vehicles were built with more than one version of the same part, and parts can change mid-model (build date, engine or options). We note these differences where we can. Please compare with your existing part before ordering.

Packaging: Manufacturers periodically update their packaging and labelling. You may receive the current or a previous design — the product, formulation and part number are unchanged.

Fitment (vehicle-specific products): Vehicle fitment is based on manufacturer and supplier catalogue data and is kept as accurate as possible, but vehicle catalogues are not perfect. Some models had more than one part fitted depending on build date, engine, or component size/variant, and parts on older vehicles may have been replaced with non-original or different-style components.

Before you buy, compare the product images with the part currently fitted to your vehicle — check shape, size, connectors and mounting points. If the part on your vehicle looks different, please contact us before purchasing. It is the buyer's responsibility to confirm the part suits their vehicle before purchasing.

Not sure? Message us with your vehicle's registration number and state (preferred), or full VIN/build details, and we'll do our best to confirm fitment before you buy.

Parts returned because they do not suit the vehicle, where the listing matches the manufacturer's catalogue, are treated as a change of mind and must be unused, uninstalled and in original packaging. Nothing in this notice affects your rights under the Australian Consumer Law.

More From This Category